Ptz dome camera set up – Interlogix DVR 60 User Manual User Manual

Page 14

Advertising
background image

1BChapter 2: Installation

8

TruVision DVR 60 User Manual

Supported cameras

Resolutions
supported

Maximum bit rate -
Main stream

Maximum bit rate
- Sub stream

UltraView IP PTZ camera

4CIF, 2CIF, CIF, QCIF 1.7Mbps

1Mbps

CamPlus2 IP camera

VGA, QVGA

2Mbps

N/A

Panasonic IP camera

VGA, QVGA

2Mbps

N/A

PTZ dome camera set up

Use the USB mouse provided or the optional keypad for local telemetry control. If
using the TVR 60 over a network, use the web browser to control the PTZ dome
cameras or TruVision Navigator.

See Appendix C “PTZ protocols” on page 135 for the supported protocols.

Each PTZ camera must be set up individually. For information on configuring
PTZ dome camera settings, see Chapter 7 “Controlling a PTZ dome camera” on
page 47.

Connecting a TVR 60 to a PTZ dome camera and a
keypad

Use the input/output box that is supplied with the keypad to connect a keypad to
the TVR 60. The keypad can be connected to a PTZ camera for local control or
for control over the network.

See Figure 2 on page 9 for the preferred setup. Any PTZ dome camera can be
controlled as the DVR is doing the PTZ protocol translation. However, this setup
provides only limited dome configuration.

Advertising