Interlogix DVR 60 User Manual - Manual (Page 22)

1BChapter 2: Installation
16 TruVision DVR 60 User Manual
Brackets
The DVR is easily rack-mountable with the purchase of the TVR-RK-1 rack-
mount kit. See Figure 7 below. Contact your local supplier to order it.
Figure 7: Rack mount installation
Attach small front rack ears to the unit
(screws supplied) Attach DVR to front rails
(screws not included)
To install the racks:
1. Attach the two small front-rack mount ears to the DVR (screws supplied).
2. Attach the two large rear support brackets (not supplied) to the rear rails.
3. Attach the DVR to the front rails (screws not supplied).
Caution:
Do not rack mount the TVR 60 without the rear rails installed. Failure to install the rear
rails can damage the DVR.
 Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly,
the operating ambient temperature of the rack environment may be greater than
room ambient. Therefore, consideration should be given to installing the
equipment in an environment compatible with the maximum ambient
temperature (40°C) specified by the manufacturer.
 Reduced Air Flow - Installation of the equipment in a rack should be such that the
amount of air flow required for safe operation of the equipment is not
compromised.
 Mechanical Loading - Mounting of the equipment in the rack should be such that
a hazardous condition is not achieved due to uneven mechanical loading.