Interlogix DVR 60 User Manual - Manual (Page 143)

TruVision DVR 60 User Manual 137
Appendix D
TVK-505U keypad
Using a TVK-505U keypad
Use the keypad to carry out functions similar to the front panel buttons. For
detailed keypad instructions, refer to the TVK-505U controller keypad user
manual.
Setting up a TVK-505U keypad to work with the TVR 60
To set up a TVK-505U keypad:
1. In the keypad live mode menu press the Ⓔ or Ⓒ button to select the DVR tab
required.
2. Press the option DVR .
3. Enter the number of the DVR. The value must be between 0 and 255.
4. Press the Ⓔ button to confirm.
The message, MASTER ENABLED, momentarily appears.
To access the programming menus of a PTZ dome camera using a TVK-
505U keypad:
1. In the keypad live mode menu press the PTZ button.
Keypad enters PTZ mode.
Note: For information on programming a PTZ dome camera, please refer to
the PTZ camera user manual.