Canon MARKLL WUX10 - Manual (Page 16)

Projector WUX10 MarkII User Commands
- 12 -
Revision History / Date Changes Revised by Approved by
6. Details of Command
Descriptions of each command are provided starting from the next page.
The command descriptions have the format shown below.
Alphabetic command name
This briefly describes the command function.
Format
This indicates the command format.
Environment
This defines the environments that support the command (power supply state, input signal state).
Power*1 Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
*2 *3 *4 *5 *5 *5 *5 *5 *5 *6
*1 Power Executable regardless of power supply state when marked by “-“.
*2 OFF “O” when power supply state is OFF.
*3 ON “O” when power supply state is ON.
*4 PM “O” when the power supply state is enabled while power management is in standby.
*5 Input The command is enabled in states marked by “O”.
The command is executable regardless of input when marked by “-“.
*6 None Input signal is required when “X“.
Response
This describes the command response.
Description
This includes the command function, conditions, and notes.
Example
This provides command usage examples.