Canon MARKLL WUX10 - Manual (Page 42)

Projector WUX10 MarkII User Commands
- 38 -
Revision History / Date Changes Revised by Approved by
HPOS/VPOS
Horizontal/Vertical position adjustment
Format
HPOS=<Horizontal position:Number>
VPOS=<Vertical position:Number>
GET□HPOS / ?△HPOS
GET□VPOS / ?△VPOS
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X X O O X X X X
Response
"i:OK" is returned if the parameter was set properly.
For '
GET HPOS
' or '
?HPOS
' ('
GET VPOS
' or '
?VPOS
'), current horizontal (vertical) position is returned as
'g:HPOS=<Horizontal position:Number>'
（'g:VPOS=<Vertical position:Number>'）
For details on other responses, refer to the "Error List".
Description
(1) This adjusts the horizontal and vertical position on the screen.
(2) This command functions in the same way as when "Display setting" - "Input signal settings" -
"Horizontal position adjustment" or "Vertical position adjustment" are selected on the menu.
(3) If the input is neither "A-RGB1" nor "A-RGB2", 'e:200X INVALID_SOURCE(***)' is returned
as an error response.
(4) If signals are not input, 'e:2010 NO_SIGNAL' is returned.
(5) Adjustment range is limited. If number is invalid, "e:0801 INVALID_VALUE" is returned.
(6) The GET command can be used to retrieve the current horizontal and vertical position. ("
GET
HPOS
" "
GET VPOS
")
Example
Setting
>HPOS=12 This sets the horizontal position to 12.
<i:OK
Reference
>GET VPOS or ?VPOS This acquires the vertical position.
<g:VPOS=8
* Commands are indicated by ">", and responses are indicated by "<".