Canon MARKLL WUX10 - Manual (Page 68)

Projector WUX10 MarkII User Commands
- 64 -
Revision History / Date Changes Revised by Approved by
RGBGAIN
RGB gain adjustment
Format
RGBGAIN=<R gain setting:Number>▽<G gain setting:Number>▽<B gain setting:Number>
GET□RGBGAIN / ?△RGBGAIN
Setting values for <R/G/B gain setting:Number> are -60 to 60.
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
"i:OK" is returned if the parameter was set properly.
For '
GET RGBGAIN
' or '
?RGBGAIN
', current RGB gain adjustment values are returned as
' g:RGBGAIN=<R gain setting:Number>,<G gain setting:Number>,<B gain setting:Number> '
For details on other responses, refer to the "Error List".
Description
(1) This command is used to adjust the gain of the R, G and B colors.
(2) This command functions in the same way as when "Image adjustment" - "Color adjustment" -
"Gain adjustment" are selected on the menu.
(3) If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.
(4) This sets the currently selected input signal and image mode.
(5) The current RGB gain values can be obtained using the GET command. ("
GET RGBGAIN
")
Example
Setting
> RGBGAIN=10, 11, 12 The R gain is set to 10, G gain to 11 and B gain to 12.
< i:OK
Reference
> GET RGBGAIN or ?RGBGAIN The RGB gain values are obtained.
< g:RGBGAIN=-10, 0, 19
* Commands are indicated by ">", and responses are indicated by "<".