Canon MARKLL WUX10 - Manual (Page 47)

Projector WUX10 MarkII User Commands
- 43 -
Revision History / Date Changes Revised by Approved by
INPUT
Input selection
Format
INPUT=<Input selection parameters:ID>
GET□INPUT / ?△INPUT
<Input selection parameters:ID>
D-RGB D-RGB
A-RGB1 A-RGB1
A-RGB2 A-RGB2
COMP Component
VIDEO Video
HDMI HDMI
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
"i:OK" is returned if the parameter was set properly.
For '
GET INPUT ' or ' ?INPUT ', current input selection is returned as
'g:INPUT=<Input selection parameters:ID>'
For details on other responses, refer to the "Error List".
Description
(1) This controls the input selection.
(2) This command is identical to pressing the “INPUT” button on the remote control.
(3) The input can be selected automatically using the auto setup command
(AUTOSETEXE=INPUT).
(4) The current input can be acquired using the applicable GET command. (" GET INPUT ")
Example
Setting
> INPUT=VIDEO
The input is set to VIDEO.
< i:OK
Reference
> GET INPUT or ?INPUT
This retrieves the input signal.
< g:INPUT=A-RGB1
* Commands are indicated by ">", and responses are indicated by "<".