Canon MARKLL WUX10 - Manual (Page 81)

Projector WUX10 MarkII User Commands
- 77 -
Revision History / Date Changes Revised by Approved by
WB
Screen color correction
Format
WB=<Screen color correction parameters:ID>
GET□WB / ?△WB
<Screen color correction parameters:ID>
NORMAL Standard
GREENBOARD Blackboard
ADJUST Adjust
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
"i:OK" is returned if the parameter was set properly.
For '
GET WB
' or '
?WB
', current screen color correction is returned as
'g:WB=<Screen color correction parameters:ID>'
For details on other responses, refer to the "Error List".
Description
(1) The screen color correction is set to “Normal”, “Blackboard”, or “Adjust”.
(2) This command functions in the same way as when "Display setting" - "Screen color correction"
are selected on the menu.
(3) When "ADJUST" has been selected, adjust the RGB adjustment values using the WBRGB
command.
(4) The current screen color correction can be acquired using the applicable GET command. ("
GET
WB
")
Example
Setting
> WB=NORMAL This sets the screen color correction to “Normal”.
< i:OK
Reference
> GET WB or ?WB This retrieves the screen color correction.
< g:WB=GREENBOARD
* Commands are indicated by ">", and responses are indicated by "<".