Jeep 2013 Wrangler - Manual (Page 194)

3. Remove the soft top bow assembly pivot bracket screws
(two per side) using a #T30 Torx ௡ head driver.
4. Disconnect the knuckles from the left and right metal
pivot brackets. Remove the soft top from the vehicle
and store in a clean, dry location.
NOTE: To aid in disconnecting the knuckles, you may
carefully tap on the knuckles using a rubber mallet.
5. Unzip the zipper on the sport bar cover to expose the
pivot brackets. Remove the brackets using a #T30 Torx ௡
head driver. Recover and re-zip the sports bar cover.
Store the pivot brackets and screws in a safe place.
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE