Fluid and filter changes, Manual transmission – if equipped, Selection of lubricant – Jeep 2013 Wrangler User Manual

Page 590: Clutch hydraulic system (manual, Transmission) – if equipped

Advertising
background image

7. Check for leaks. Release the parking brake.

NOTE:

To prevent dirt and water from entering the

transmission after checking or replenishing fluid, make
sure that the dipstick cap is properly reseated. It is
normal for the dipstick cap to spring back slightly from
its fully seated position, as long as its seal remains
engaged in the dipstick tube.

Fluid And Filter Changes

Refer to the “Maintenance Schedule” for the proper
maintenance intervals.

In addition, change the fluid and filter(s) if the transmis-
sion is disassembled for any reason.

Clutch Hydraulic System (Manual Transmission) –
If Equipped

The clutch hydraulic system is fed by a segregated
volume of fluid within the brake system master cylinder
reservoir. In the event of leakage or wear, use only the
manufacturer’s recommended brake fluid. Refer to “Flu-
ids, Lubricants, and Genuine Parts” in “Maintaining Your
Vehicle” for further information.

Manual Transmission – If Equipped

Selection Of Lubricant

Use only manufacturer’s recommended manual transmis-
sion fluid. Refer to “Fluids, Lubricants, and Genuine Parts”
in “Maintaining Your Vehicle” for further information.

588

MAINTAINING YOUR VEHICLE

Advertising