Jeep 2013 Wrangler - Manual (Page 37)

5. Unplug the wiring harness connector.
NOTE: If the red latch on the connector is locked, push
the red latch to the right until you can only see the latch
on one end (right) of the connector. This will unlock the
connector tab, allowing the tab to be pressed down and
enabling the harness to be disconnected.
6. Unhook the door strap from the body hook.
7. With the door open, lift the door to clear the hinge pins
from their hinges and remove the door.
Trim Access Door Red Connector Latch
2
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35