Automatic door locks — if equipped, Automatic unlock doors on exit, Automatic unlock doors on exit programming – Jeep 2013 Wrangler User Manual

Page 41

Advertising
background image

Automatic Door Locks — If Equipped

When enabled, the door locks will lock automatically
when the vehicle’s speed exceeds 15 mph (24 km/h). The
auto door lock feature can be enabled or disabled by your
authorized dealer . Please see your authorized dealer for
service.

Automatic Unlock Doors On Exit

The doors will unlock automatically on vehicles with
power door locks if:

1. The “Automatic Unlock Doors On Exit” feature is

enabled.

2. The vehicle speed returned to 0 mph (0 km/h) and the

transmission shift lever is in NEUTRAL or PARK.

3. The driver door is opened.

4. The doors were not previously unlocked.

Automatic Unlock Doors On Exit Programming

The “Automatic Unlock Doors On Exit” feature can be
enabled or disabled as follows:

1. Close all doors and place the key in the ignition.

2. Cycle the ignition switch between LOCK and ON/

RUN and then back to LOCK four times ending up in
the LOCK position.

3. Press the power door unlock switch to unlock the

doors.

4. A single chime will indicate the completion of the

programming.

5. Repeat these steps if you want to return this feature to

its previous setting.

NOTE:

Use the “Automatic Unlock Doors On Exit”

feature in accordance with local laws.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

39

Advertising