Jeep 2013 Wrangler User Manual
Page 197
Advertising
NOTE:
To aid in reattaching the knuckles, you may
carefully tap on the knuckles using a rubber mallet.
4. Screw the pivot screws back into place using a #T30
Torx
head driver. Secure them until they are snug,
being careful not to cross-thread the screws or over-
tighten.
CAUTION!
Do not overtighten the screws. You can strip the
screws if they are overtightened.
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
195
Advertising