Eco (fuel saver mode) — if equipped, Automatic compass calibration – Jeep 2013 Wrangler User Manual

Page 329

Advertising
background image

NOTE:

The system will display the last known outside

temperature when starting the vehicle and may need to
be driven several minutes before the updated tempera-
ture is displayed. Engine temperature can also affect the
displayed temperature; therefore, temperature readings
are not updated when the vehicle is not moving.

ECO (Fuel Saver Mode) — If Equipped

The ECO message will display below the outside tem-
perature in the EVIC display (if the audio system is on
the ECO indicator will override the audio information
display line if the

ЉDisplay Fuel SaverЉ personal setting is

ON — see

ЉPersonal SettingsЉ section). This message will

appear whenever you are driving in a fuel efficient
manner.

This feature allows you to monitor when you are driving
in a fuel efficient manner, and it can be used to modify
driving habits in order to increase fuel economy.

Automatic Compass Calibration

This compass is self-calibrating, which eliminates the
need to set the compass manually. When the vehicle is
new, the compass may appear erratic and the EVIC will
display “CAL” until the compass is calibrated. You may
also calibrate the compass by completing one or more
360–degree turns (in an area free from large metal or
metallic objects) until the “CAL” message displayed in
the EVIC turns off. The compass will now function
normally.

NOTE:

A good calibration requires a level surface and an

environment free from large metallic objects such as build-
ings, bridges, underground cables, railroad tracks, etc.

4

UNDERSTANDING YOUR INSTRUMENT PANEL

327

Advertising