Jeep 2013 Wrangler - Manual (Page 203)

CAUTION!
Do not overtighten the screws. You can strip the
screws if they are overtightened.
6. Remove the tether strap from the pivot bracket and
slide down the side bow (both sides).
7. Button the side bow tether strap (both sides).
8. Remove the swing gate bar (black metal bar for
bottom of rear window) and set aside.
NOTE: Be sure the wire harness in the left rear corner is
not tangled in the soft top bows before you lift the top.
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201