CyberResearch CPEN GX-333-X - Manual (Page 13)

CyberResearch
®
CPU Cards CPEx GX-333-X
CyberResearch, Inc. 11
25 Business Park Drive P: (203) 483-8815; F: (203) 483-9024
Branford, CT USA www.cyberresearch.com
Connectivity
The CPEx GX-333-X provides the following interface connections:
Label Function
CN1 Supplementary “–VCC” power connector
CN2 4P primary power connector
CN3 3-pin PS_ON signal connector
CN4 2-pin power button switch connector (board version 1.10 only)
CN5 2-pin reset button switch connector (board version 1.10 only)
CN6 6-pin LED connector (to chassis LEDs) (board version 1.10)
CN6 6-pin LED connector (to chassis LEDs) (board version 1.11)
CN7 5-pin LCD inverter control-
CN8 3-pin CPU fan header
CN9 34-pin Floppy connector
CN10 24-bit TTL LCD connector (DF13-40P-1.25V)
CN11 40-pin Primary IDE connector (40-pin 2.54mm)
CN12 8-pin internal USB1 2.0 connector (2 USB ports via an adapter
cable)
CN13 8-pin internal USB2 2.0 connector (2 USB ports via an adapter
cable)
CN14 2-pin battery connector to an onboard Lithium coin cell
battery
CN15 5-pin IrDA port pin header
CN16 10-pin digital I/O connector
CN17 26-pin parallel port connector
CN18 14-pin internal serial port (COM2/3) pin header
CN19 10-pin audio connector
CN20 4-pin audio CD_IN pin header
CN21 D-SUB 9 external serial port (COM1)
CN22 RJ-45 Ethernet port
CN23 D-SUB 15-pin VGA connector
CN24 PS/2 keyboard/mouse connector
CN25 6-pin pin header supplementary keyboard/mouse connector
(an adapter module is required)
CN26 Serial ATA connector
CN27 Serial ATA connector
CN28 Compact Flash Storage Card socket (on the soldering
side)
CN29 SDRAM DDR SO-DIMM socket
System supports up to 1GB memory size including
the 256MB soldered memory, which must be
deducted from the total when adding a memory
module to this socket.