CyberResearch CPEN GX-333-X User Manual
Page 57
CyberResearch
®
CPU Cards
CPEx GX-333-X
CyberResearch, Inc.
55
25 Business Park Drive
P: (203) 483-8815; F: (203) 483-9024
Branford, CT USA
www.cyberresearch.com
The following sections will completely describe the menus listed below and
the configuration options available to users.
The following menu options are seen in the Main Menu.
1.
Standard CMOS Features: Changes the basic system configuration.
2.
Advanced BIOS Features: Changes the advanced system settings.
3.
Advanced Chipset Features: Changes the chipset configuration features
4.
Integrated Peripherals: Changes the settings for integrated peripherals
5.
Power Management Setup: Allows you to configure power saving options
6.
PCI/PnP Configurations: Changes the advanced PCI/PnP Settings
7.
PC Health Status: Menu that monitors essential system parameters
The following user configurable options are also available in the BIOS Main Menu
Î
Load Fail-Safe Defaults
This option allows you to load failsafe default values for each of the parameters on the Setup
menus. F6 key can be used for this operation on any page.
Î
Load Optimized Defaults
This option allows you to load optimal default values for each of the parameters on the Setup
menus. F7 key can be used for this operation on any page.
Î
Set Supervisor Password
By default no Supervisor Password is set. If you wish to install a supervisor password, select
this field and enter the password. After this option has been selected, a red dialogue box with
“Enter Password: ” will appear. You will be asked to confirm your password. Retype the original
password into the “Confirm Password: ” dialogue box and press enter.
Î
Set User Password
By default no User Password is set. If you wish to install a user password, select this field and
enter the password. After this option has been selected, A red dialogue box with “Enter
Password: ” will appear. You will be asked to confirm your password. Retype the original
password into the “Confirm Password: ” dialogue box and press enter.
Î
Save & Exit Setup
If you have finished making the configuration changes and wish to save them and exit the BIOS
menus, select this option.
Î
Exit Without Saving
If you have finished making configuration changes but do not want to save them and you want to
exit the BIOS menus, select this option.