CyberResearch CPEN GX-333-X - Manual (Page 26)

CPEx GX-333-X CyberResearch
®
CPU Cards
24 ©Copyright 2007 CyberResearch, Inc.
NOTE:
1. The configuration options through jumper settings will be discussed
in Chapter 3: Installation.
2. On the solder side, there are a CFII card socket and a 200-pin SO-
DIMM socket.
Shown below is a diagram indicating the locations of configuration jumpers.
Figure 2-8 Board Version 1.10 and Version 1.11 Locations of Configuration Jumpers
NOTE:
1. Only configuration jumpers are shown in the diagram above.
2. For more configuration details on jumper settings, please refer to
Chapter 3 Installation.