CyberResearch CPEN GX-333-X User Manual
Page 45
CyberResearch
®
CPU Cards
CPEx GX-333-X
CyberResearch, Inc.
43
25 Business Park Drive
P: (203) 483-8815; F: (203) 483-9024
Branford, CT USA
www.cyberresearch.com
Considerations Prior to Installation
Preparing Your SBC
The embedded board contains numerous delicate electronic circuits and components, which can
become damaged as a result of electrostatic discharge (ESD). Thus, prior to installation, please
follow the instructions below:
1.
Please turn off the computer and unplug its power cord.
2.
When handling the board, avoid touching any metal leads or connectors.
3.
It is best to wear an electrostatic discharge (ESD) cuff when handling electronic components
(CPU, RAM).
4.
Prior to installing the electronic components, please have these items on top of an anti-static
pad or within an electrostatic shielding container.
5. Please verify that the power supply is switched off before unplugging the power supply
connector from the motherboard.
Installation Notices
1. Prior to installation, please do not remove the stickers on the system board. These stickers
are required for warranty validation.
2. Prior to the installation of the system board or any hardware, please first carefully read the
information in the provided manual.
3. Before using the product, please verify that all cables and power connectors are connected.
4. To prevent damage to the SBC card, please do not allow screws to come in contact with the
PCB circuit, connector pins, or its components.
5. Please make sure there are no leftover screws or metal components placed on the PCB
board or within the computer casing.
6. Please do not place the computer system on an uneven surface.
7. Turning on the computer power during the installation process can lead to damage to system
components as well as physical harm to the user.
8. If you are uncertain about any installation steps or have a problem related to the use of the
product, please consult a certified computer technician.