CyberResearch CPEN GX-333-X - Manual (Page 86)

CPEx GX-333-X CyberResearch
®
CPU Cards
84 ©Copyright 2007 CyberResearch, Inc.
2. RAID
Options:
2.1 Create RAID0 Striping for Performance
Step 1. To create a RAID0 array, use your arrow keys to highlight and press Enter
to activate this item. An ‘S’ flashing character will appear at the Drive
Selection Menu where you can choose the member drives to be included in
the RAID0 array.
Step 2. Use the Space key to select members of the RAID0 RAID configuration.
The flashing cursor should change to a lower case ‘s’ character once any
of the connected disk drives has been selected. Follow the same method
to select another member drive.
Step 3. You should then be prompted by a “Create RAID0(Y/N)” confirm box.
Step 4. Press Y and then some necessary information will be written to the
selected disk drives.
WARNING!
All data previously stored on the member drives of a RAID configuration will
be destroyed during the RAID initialization process. If you use “used” drives
to create a RAID array, make sure you have moved or backed up your data
before creating a RAID array out of these disk drives.
Step 5. Next you will be prompted to enter a nickname for the created array.
Upper and lower case alphabetic, numeric, space, and underscore
characters are all applicable for naming an array.
Step 6. Once an array is successfully created, it will be listed in the list of the
configured arrays.