CyberResearch CPEN GX-333-X User Manual
Page 65
CyberResearch
®
CPU Cards
CPEx GX-333-X
CyberResearch, Inc.
63
25 Business Park Drive
P: (203) 483-8815; F: (203) 483-9024
Branford, CT USA
www.cyberresearch.com
4.
Refresh Rate ranging from 60 to 100Hz.
5.
HSYNC Polarity value to High or Low.
6.
VSYNC Polarity value to High or Low.
7.
SHFCLK Active Period time to Active Only or Free running.
8.
LP Active Period time to Active Only or Free Running.
Î
Overcurrent Reporting [Disabled]
If set to enabled and the detected current exceeds safety thresholds, the audible alarm will be
sounded.
Î
Port 4 Assignment [Host]
Factory default is Host. This is a factory reserved function.
Î
UART Port A
This item allows you to select a starting address from hex 3F8/IRQ4 to 2E8/IRQ3 for the first
serial port.
Î
Onboard Audio [Enabled]
The Onboard Audio configuration option enables or disables the Realtek AC’97 CODEC
onboard.
Integrated Peripherals
The Integrated Peripherals menu allows you to change the configuration option for peripheral
devices.
The Integrated Peripherals menu has three options listed below:
1.
Master Drive PIO Mode
2.
Slave Drive PIO Mode
3.
IDE Primary Master UDMA
4.
IDE Primary Slave UDMA
5.
IDE DMA transfer access
6.
IDE HDD Block Mode
7.
Onboard FDC Controller
8.
Onboard Serial Port 1
9.
Onboard Serial Port 2
10.
Onboard Serial Port 3
11. UART
Mode
Select
12.
Onboard Parallel Port
13.
Parallel Port Mode
Select the menu you wish to configure.
OnChip IDE Device
The OnChip IDE Device menu allows you to change the IDE device configurations. This item is
always enabled.
Î
Master/Slave Drive PIO Mode [Auto]