CyberResearch CPEN GX-333-X - Manual (Page 47)

CyberResearch
®
CPU Cards CPEx GX-333-X
CyberResearch, Inc. 45
25 Business Park Drive P: (203) 483-8815; F: (203) 483-9024
Branford, CT USA www.cyberresearch.com
Jumper Settings
NOTE:
A jumper is a metal bridge that is used
to close an electrical circuit. It consists
of two metal pins and a small metal clip
(often protected by a plastic cover) that
slides over the ins to connect them. To
CLOSE/SHORT a jumper means
connecting the pins of the jumper with
the plastic clip and to OPEN a jumper
means removing the plastic clip from a
jumper.
Figure 3-35 Board Version 1.10 and Version 1.11 Locations of Configuration Jumpers
JP1: CRT/Flat Panel Display Selector
Table 3-31 JP1 Pin Configuration
Figure 3-34 Jumper