KERN & SOHN DLB 160-3A - Manual (Page 37)

DLB_A-BA-e-1511 37
10.1.2 Moisture analysis with drying program PrG time
After setting the drying time (available 1 -99 Min) and the drying temperature (available
35 – 160°C), moisture will be analyzed with the help of these two parameters.
 Confirm by pressing the PRINT button. The currently set drying time is displayed.
 Use the navigation buttons   to select the desired setting.
 Confirm by pressing the PRINT button. The currently set drying temperature is
displayed.
 Use the navigation buttons   to select the desired setting.
 Confirm by pressing the PRINT button. The query whether the preheating stage
„PrH“ shall be connected, will appear.

 Use the navigation buttons   to select the desired setting.
PrH no = preheating stage switched off
PrH yes = preheating stage connected