KERN & SOHN ALT 250-4B - Manual (Page 52)

52 ALT_B-PLT_A-PLT_F-BA-e-1333
11.13 Adjustment log
This function helps to print out a record of the last adjustment.
Make sure that the communication parameter of balance and printer are the
same.
Communication parameters, see chap. 9.2 and 11.3
 In weighing mode press the MENU button and keep it pressed until the acoustic
signal gets mute. The setup menu is displayed.
 Use the navigation buttons  to select the menu item „Calibration info“.
 Confirm with PRINT button; date, time, adjustment type and deviation of the last
adjustment are displayed.
 If you connect an optional printer you can also print these data by pressing the
PRINT key.
Printout example (KERN YKB-01N):
27-08-11 10:41:17 Current date/time
Calibration:
27-08-11 10:11:17 Date/time of the last
adjustment
Internal calib. Type of adjustment
Corr. : 0.21 g Deviation from last adjustment
 Press the ON/OFF key. Weighing balance returns to menu. Either make more
adjustments in the menu if required or press ON/OFF button anew; the balance
will return into weighing mode.