KERN & SOHN ALT 250-4B - Manual (Page 71)

ALT_B-PLT_A-PLT_F-BA-e-1333 71
7. Confirm by pressing the PRINT button. The input of the minus-tolerance is
displayed.
8. Enter the negative tolerance value: ex.: -10 %
9. Confirm by pressing the PRINT button. The input of the plus-tolerance is
displayed.
10. Enter the positive tolerance value: ex.: 5 %
11. Confirm by pressing the PRINT button
12. To enter more components (max. 20) repeat step 3
– 11 respectively.
13. Once having entered all components, use the ON/OFF button to exit the formula
entry mode.
 Back to weighing mode, press ON/OFF button anew.