KERN & SOHN ALT 250-4B - Manual (Page 91)

ALT_B-PLT_A-PLT_F-BA-e-1333 91
14 Error messages
ERR01
Weight value instable or zeroing not possible.
Check the environmental conditions.
ERR02 Adjustment error, e.g. instable environmental conditions
ERR03 Adjustment error e.g. incorrect adjustment weight}
ERR04 Piece weight too small/instable
ERR05
Data transfer not possible, as weighing value is instable. Check
the environmental conditions.
ERR06
Weighing value in density determining mode instable.
Check the environmental conditions.
ERR07
Weighing value in percentage determining mode instable.
Check the environmental conditions.
ERR08
Error at internal adjustment
Weighing value in formula mode instable.
Check the environmental conditions.
“UNLOAD”:
Weighing range not achieved.
Check position of the weighing pan.
“CAL But”
Adjust balance.
Weighing range exceeded, placed load exceeds the capacity of
the balance. Unload the balance.
Weighing range not reached, e.g. weighing pan not in place