KERN & SOHN MPE 250K100HM - Manual (Page 31)

11 Operation
11.1 Weighing

Start balance by pressing
The balance will carry out a self-test
The scales are ready for operation as soon as the weight
display for “0.0 kg“ has appeared.
• However, you can reset the weighing scale to zero by pressing
the key.

Have person stand in the centre of the scales. Wait until the
standstill display „STABLE“ appears, then read the weighing
result.
• If the person is heavier than the weighing range, "OL"
(=overload) will appear in the display.
11.2 Taring
The tare weight of any preloads can be deducted by pressing a button so that the
actual weight of the person is displayed in subsequent weighings.
(example)

Put object (such as towel or padding) on the weighing pan.

Press , the zero display appears.
„NET” is shown at the bottom on the left.
(example)

Allow the person to step onto the centre of the weighing
platform. Wait until the standstill display „STABLE“ appears,
then read the weighing result.
• When the balance is unloaded the saved taring value is
displayed with negative sign.
• To delete the stored tare value, release scales and press
.
MPC_M / MPE_HM / MPE_PM-BA-e-1414 31