KERN & SOHN MPE 250K100HM - Manual (Page 42)

12.3 Menu overview MPE models
Menu block
Main Menu Menu item
Submenu Available settings / explanation
Automatic cutout
Auto Off
oFF 0* Automatic shutdown off
oFF 3 Automatic shutdown after 3 min
oFF 5 Automatic shutdown after 5 min
oFF 15 Automatic shutdown after 15 min
oFF 30 Automatic shutdown after 30 min
oFF Not documented
Prt
Pr ACC
Interface
parameter
1. RS-232 mode
Select desired mode by , then confirm with .
P Prt
Weight will be added to summation memory and printed
after pressing PRINT
P Cont Continuous data output
Series Not documented
ASK Remote control instructions:
W: Send al
l weighing results
S: Send stable weighing result
T: Tare
Z: Zero setting
P cnt 2 Not documented
P Stab Automatic data output of stable weighing values
P Auto Weighed result will be added automatically to
summation memory and issued
2. Baud rate
The currently set baud rate (b xxx) will be shown after the RS-
232 mode was confirmed. Select desired Baudrate by pressing
and confirm by pressing .
Available Baudrate: 600, 1200, 2400, 4800, 9600
42 MPC_M / MPE_HM / MPE_PM-BA-e-1414