KERN & SOHN MPE 250K100HM - Manual (Page 55)



Place adjustment weight in the centre of the weighing pan

Wait until stability display „STABLE“ appears

Confirm by pressing (MPE) or (MPC), [PASS] will
be displayed.

The balance carries out a selftest, after that [Err19]
will be displayed and a signal will sound.

Switch off the balance

Take away adjustment weight

Turn on balance again, after the selftest the balance changes
into the weighing mode. Adjustment has now been completed
successfully.
MPC_M / MPE_HM / MPE_PM-BA-e-1414 55