KERN & SOHN MPE 250K100HM - Manual (Page 32)

11.2.1 Subsequent tare weight
The balance can be tared several times successively.
11.3 HOLD function
The balance has an integrated standstill function (mean value calculation). With this
function it is possible to weigh people accurately even if they do not stand still on the
weighing plate.

Start balance by pressing .
Wait for stability display „STABLE to appear.
(Example)

Press (MPE) (MPC) in the display „---------“ will
appear and the „HOLD“ symbol appears.

Allow the person to step onto the centre of the weighing
platform.

After a short time the stability display „STABLE“ appears and
the weighing value of the person is displayed and „frozen“.
After unloading the balance, the weighing value remains
displayed for approx. 10 seconds, than the balance changes
automatically into the weighing mode.
The symbol „HOLD“ disappears.
There is no average value calculation in the event of too much
movement.
11.4 Show second decimal place
Press and hold for about 2 s whilst weighed result is being shown. The second
decimal place will be shown for approx. 5 s.
32 MPC_M / MPE_HM / MPE_PM-BA-e-1414