LABEC M-TIT-5 - Manual (Page 32)

In which:
 ‘﹤’ is moving left,
 ‘﹥’ is moving right,
 ‘1﹤’ is moving leftmost,
 ‘﹥1’ is moving rightmost.
User could also move the indicating line to a certain position directly by pressing the position in
curve display area. In which:
 ‘﹤﹤’ is reduce button, the graph will be reduced by pressing this button,
 ‘﹥﹥’ is enlarge button, the graph will be enlarged by pressing this button (get the indicating
line as central).
The real curve is potential-volume curve. Virtual curve is one time differential-volume curve.
 ‘E’ is the transferring witch to switch on/off of potential-volume curve.
 “E’”is the transferring witch to switch on/off of one time differential-volume curve.
The small square on curve is end point position. On the bottom of left corner is the titration data
corresponding to indicating line, including potential, volume and differential. On the bottom of right
corner is end point area, displaying end point number and corresponding end point value.
From here, user is allowed to store titration curve, print titration result, print titration data, print
titration curve, view titration parameter and titration time. User is also allowed to set end point,
delete end point. If titration has end point, user is also allowed to generate special mode and
calculate concentration value of sample.
8.1.1 Store Titration Data
When titration is finished, user can store titration curve in order to use it for analysing and
observation. In viewing status, press ‘Store’ button in menu, select ‘Store Titration Data’ and
then press ‘Enter’ button, meter will display ‘Store Titration Data?’ you can press ‘Enter’ to
store current titration data, press ‘Exit’ to quit and return to viewing status. Please note: Meter
can only store titration curve once, after storing, meter will delete previous titration curve
automatically.
Store Mode Concentration End point Print About
Enter Exit
Store Titration Data?
Diag.40 Display Storing Titration Curve
31