LABEC M-TIT-5 - Manual (Page 4)

CONTENT
I. General
II. Main Specifications and Performance
III. Construction of the meter
IV. Operation
1. Installation of the meter
2. Functions of the meter
3. Mode of titration
4. Switching on the meter
5. Feeding solution
6. Cleaning
7. Titration
7.1 Pre-titration
7.2 Preset end point titration
7.3 Mode titration
7.4 Blank titration
7.5 Manual titration
8. Settlement of titration data
8.1 Present data settlement
8.1.1 Store titration data
8.1.2 Mode of production
8.1.3 Concentration of sample
8.1.4 End point set or amendment
8.1.5 Print
8.1.6 About
8.2 View and print stored data
9. Mode
10. Setting up of parameter
10.1 Setting stirring speed
10.2 Setting time
10.3 Setting printer
10.4 Setting burette
11. Calibration of electrode
12. PH measurement
13. Calibration of burette coefficient
V. Maintenance and Service of the Meter
VI. The Complete Sets of the Meter
VII. Appendix
3