PRG Best Boy Field Service Manual - Manual (Page 32)

24 BEST BOY 4000 ® SPOT LUMINAIRE FIELD SERVICE MANUAL
ROUTINE MAINTENANCE
Removing Head Covers
To access some interior components, one or both of the Head Covers may need to be removed.
A label on the backcap indicates which wheel components the head cover provides access to.
Tools & Supplies:
#2 Philips screwdriver
To remove Head Covers:
Step 1. At cover, loosen four captive screws (Figure 3-2). (Cover will still be secured by a safety lanyard.)
Step 2. Unclip lanyard to completely remove cover.
Figure 3-2: Removing Head Covers
Step 3. Replace covers as follows:
a. Attach lanyard clip.
b. Fit cover in place.
c. Tighten four captive screws.
R2 / Designer Wheel
Head Cover
R1 Head Cover
Captive
Screw (4)
CAUTION: DO NOT let covers hang by lanyards!