PRG Best Boy Field Service Manual - Manual (Page 52)

44 BEST BOY 4000 ® SPOT LUMINAIRE FIELD SERVICE MANUAL
Step 9. Using a flat screwdriver, press down on sharp edges of belt (left by the cutter) as shown in Detail B. (This
should remove the cutting hazard.)
Figure 3-18: Installing Light Shield with Steel Band
Light Shield
Steel Band
Installation Tool
Front Ring
DETAIL A
DETAIL B
Light Shield
Fit notch
Press down on sharp corners
Wrap band around outside edge, flush with ridge
Side Rail
into groove
R2 / Designer Wheel
Head Cover
Fastener Clip