PRG Best Boy Field Service Manual - Manual (Page 40)

32 BEST BOY 4000 ® SPOT LUMINAIRE FIELD SERVICE MANUAL
Cleaning Gobo, Color, and Effect Wheels
Tools & Supplies:
Micro Fiber cloth (06.6085.0001.0)
OptiMax™ Ultra Pure Cleaning Solution (06.6084.0001.0)
Cotton gloves or finger cots
#2 Phillips screwdriver
To clean gobo, color and effect wheels:
CAUTION: Use ONLY OptiMax™ Ultra Pure Cleaning Solution to clean optical components. DO NOT use
Window Cleaner on gobo, color, or dimmer wheels! Wear cotton gloves or finger cots when handling optical
components.
CAUTION: The optical components are very fragile, use extreme caution when cleaning! Color gobos have
thin layers applied to one side that can be damaged if cleaned too roughly. Use caution.
WARNING: Remove power from luminaire before this procedure.
Step 1. Remove power from luminaire.
Step 2. Remove Head Covers. (Refer to "Removing Head Covers" on page 24.)
Step 3. To clean Gobos:
a. Remove all gobos. (Refer to "Replacing a Gobo in Gobo Wheel 1" on page 36.)
b. Using OptiMax™ Ultra Pure Cleaning Solution and a Micro Fiber cloth, carefully clean gobos.
DO NOT use window cleaner!
Step 4. To clean Designer Wheel:
a. Remove each filter. (Refer to "Replacing a Designer Color Filter" on page 40.)
b. Using OptiMax™ Ultra Pure Cleaning Solution and a Micro Fiber cloth, carefully clean filters.
DO NOT use window cleaner!
Step 5. To clean Color Wheels:
a. Using OptiMax™ Ultra Pure Cleaning Solution and a Micro Fiber cloth, carefully clean color wheels.
DO NOT use window cleaner!
b. Rotate wheels to access all surfaces.
Step 6. To clean Effect Wheel:
a. Using OptiMax™ Ultra Pure Cleaning Solution and a Micro Fiber cloth, carefully clean Effect Wheel.
DO NOT use window cleaner!
b. Rotate wheel to access all surfaces.
Step 7. Replace Head Covers.