PRG AutoPar User Manual 2.1 - Manual (Page 19)

AUTOPAR ® WASH LUMINAIRE USER MANUAL 11
INSTALLATION PROCEDURE
Hanging the Luminaire
The AutoPar wash luminaire can be hung horizontally or vertically from any structure designed to accommodate the
load created by this moving luminaire. Two provided clamp mounts are used to attach truss hooks or other mounting
hardware as required. A Mega-Claw truss hook is provided, however, other compatible truss hooks are available from
manufacturers such as Grainger.
The safety cable (provided), should be looped through the mounting bracket slot and then attached to the pipe.
WARNING: A safety cable and two truss hooks should be used in all hanging configurations.
Figure 2-2: Attaching Truss Hooks and Safety Cable
Mega Claw Hook (2)
Flex Top Lock Nut (2)
Clamp Mount (2)
Truss Hooks
FRONT VIEW
Grainger Beam Clamp (2)
Loop safety cable through slot Safety Cable