Menu functions – PRG AutoPar User Manual 2.1 User Manual

Page 27

Advertising
background image

AUTOPAR

®

WASH LUMINAIRE USER MANUAL

19

Menu Functions

The following is a graphic representation of the menu system. Fixture, Dmx, Lamp and Test are top level functions
which have a series of sub-functions associated with each.

Function

Purpose

Fixture

Top level menu which accesses luminaire information such as serial number, software
version, and total operation hours.

Status

Indicates calibration status.

Serial No

Displays luminaire serial number.

Version

Displays luminaire software version by date and time.

FixtHrs

Displays total number of hours luminaire has been powered on.

Dmx

Top level menu which accesses luminaire DMX address and control options.

Address

Sets DMX512 address.

Rev Tilt

Sets reverse tilt option: yes or no.

Rev Pan

Set reverse pan option: yes or no.

Time Chan

Sets luminaire to Timing Channel Mode: yes or no.

Lamp

Top level menu which accesses lamp information, turns lamp on or off, and configures
lamp operation at luminaire power-up.

Lamp On

Turns lamp on or off: yes or no.

Reset Lamp Hours

Resets total lamp operation hours.

Requires a confirmation.

Lamp Hours

Displays total number of hours lamp has been powered on.

Power-up On

Configures lamp to turn on at luminaire power-up: yes or no (default).

Test

Top level menu which accesses self-test options. Allows tests to be performed with-
out DMX512 input.

NOTE: Tests will not operate if DMX is present.

Beam Test

Rotates lens through a full range of motion at full speed.
Press [Enter] to start. Press any button other than [Enter] to stop.

Pan Test

Moves luminaire head through entire range of pan motion at full speed.
Press [Enter] to start. Press any button other than [Enter] to stop.

Tilt Test

Moves luminaire head through entire range of tilt motion at full speed.
Press [Enter] to start. Press any button other than [Enter] to stop.

All Tests

Runs Beam, Pan and Tilt tests simultaneously at full speed.
Press [Enter] to start. Press any button other than [Enter] to stop.

Fixture

Status
OK

Serial No
xxxxxx

Version
xx/xx/xx | x:xx

FixtHours
xxx

Dmx

Address
xxx

Rev Tilt
Yes/No

Rev Pan
Yes/No

Time Chan
Yes/No

Lamp

Lamp On
Yes/No

Rst Lamp Hr
Yes/No

LampHours
xxx

Powrup On
Yes/No

Test

Beam Test

Pan Test

Tilt Test

All Tests

Advertising