Placing a call-additional options, Placing a call—additional options – Cisco IP Phone 7961G User Manual
Page 25
Basic Call Handling
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
17
•
If you make a mistake while dialing, press << to erase digits.
•
If parties on a call hear a beep tone, the call might be monitored or recorded. Ask your system
administrator for more information.
Placing a Call—Additional Options
You can place calls using special features and services that might be available on your phone. See your
system administrator for more information about these additional options.
If you want to...
Then...
For more information,
see...
Place a call while another call
is active (using a different
line)
1.
Press
for the new line. The first
call is automatically placed on hold.
2.
Enter a number.
Using Hold and Resume,
page 20
Speed dial a number
Do one of the following:
•
Press
(a speed-dial button).
•
Use the Abbreviated Dial feature.
•
Use the Fast Dial feature.
Dial from a corporate
directory on the phone
1.
Choose
> Corporate
Directory (exact name can vary).
2.
Enter a name and press Search.
3.
Highlight a listing and go off-hook.
Dial from a corporate
directory on your personal
computer using
Cisco WebDialer
1.
Open a web browser and go to a
WebDialer-enabled corporate
directory.
2.
Click the number that you want to
dial.
Using Cisco WebDialer,
page 67
Use Cisco CallBack to receive
notification when a busy or
ringing extension is available
1.
Press CallBack while listening to the
busy tone or ring sound.
2.
Hang up. Your phone alerts you
when the line is free.
3.
Place the call again.
Your system
administrator
See if a line associated with a
speed-dial, call record, or
directory listing is busy before
placing a call to that line
Look for Busy Lamp Field indicators.
Using BLF to Determine a
Line State, page 39
Make a priority (precedence)
call (SCCP phones only)
Enter the MLPP access number, then
enter the phone number.