Cisco IP Phone 7961G - Manual (Page 34)

26 OL-14683-01
• Call forwarding is phone line specific. If a call reaches you on a line where call forwarding is not
enabled, the call will ring as usual.
• Your system administrator can enable a call forward override feature that allows the person
receiving your forwarded calls to reach you. With override enabled, a call placed from the target
phone to your phone is not forwarded, but rings through.
Using Do Not Disturb
You can use the Do Not Disturb (DND) feature to block incoming calls from ringing your phone. Your
system administrator enables DND for your phone.
When DND and Call Forward All are both enabled on your phone, calls are forwarded and the caller
does not hear a busy tone.
Your intercom lines still ring when DND is active.
If you want to... Then...
Turn on DND Press DND or Do Not Disturb .
“Do Not Disturb” displays on the phone, the DND lights,
and the ring tone is turned off.
Turn off DND Press DND or Do Not Disturb .
Customize DND settings If your system administrator configured DND settings to appear
on the User Options page, follow these steps:
1. Log in to your User Options web pages. See Accessing Your
User Options Web Pages, page 56 .
2. From the drop-down menu, choose User Options > Device.
3. Set the following options:
– Do Not Disturb—Set to enable/disable DND.
– DND Incoming Call Alert—Set the alert to beep only,
flash only, or disable all visible and audible alert
notifications.