Cisco IP Phone 7961G - Manual (Page 29)

Basic Call Handling
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1 21
Tips
• Engaging the Hold feature typically generates music or a beeping tone.
• If you receive an alert for an incoming call and a reverting call at the same time, by default your
phone will shift the focus of the phone screen to display the incoming call. Your system
administrator can change this focus priority setting.
• If you use a shared line, Hold Reversion rings only on the phone that put the call on hold, not on
the other phones that share the line.
• Your system administrator determines the duration between Hold Reversion alerts.
Using Mute
With Mute enabled, you can hear other parties on a call but they cannot hear you. You can use Mute
with the handset, speakerphone, or a headset.
If you want to... Then...
Toggle Microphone on Press .
Toggle Microphone off Press .
Remove a call from
hold on the current line 1. Make sure that the appropriate call is highlighted.
2. Press Resume.
Remove a call from
hold on a different line 1. Press the appropriate line button: or (flashing). Doing so might
cause a held call to resume automatically:
– If there is a reverting call on the line, that call will resume.
– If there is more than one reverting call on the line, the oldest
reverting call will resume.
– If a non-reverting held call is the only call on the line, it will
resume.
2. If necessary, scroll to the appropriate call and press Resume.
If you want to... Then...