Solvline Eddy Serial v2.5.1.1 - Manual (Page 51)

Eddy User's Guide
51
In order to use the SNMP Agent, SNMP v1/v2/v3 Agent become enabled and pushes the [Submit] button.
Feature Default Descriptions
SNMP v1/v2/v3
Agent
Disable
Enable or disable Simple Network Management Protocol (SNMP)
support.
(Options : Disable/Enable)
V1/2 Attribution ReadOnly
SNMP V1/2 Attributes can read and write by SNMP Agent.
In order to read attributes only, change the feature to "ReadOnly".
In order to read and write attributes, change the feature to
"ReadWrite".
(Options : ReadOnly/ ReadWrite)
V3 Attribution ReadOnly
SNMP V3 Attributes can read and write by SNMP Agent.
In order to read attributes only, change the feature to "ReadOnly".
In order to read and write attributes, change the feature to
"ReadWrite".
(Options : ReadOnly/ ReadWrite)
V3 Username/
Password eddy/admi
nistrator Configure the Username and the password when use SNMP V3.
The Password is at least 8 character string
TRAP IP/ Port
0.0.0.0/16
2 Configure the server IP address and Port which receive the TRAP
information.
System reset
notification
Enable
If Enable is selected, inform the “System reset info.”
(Option : Enable, Disable)
Port connect
notification
Disable
If Enable is selected, inform the “Serial Port opened info.”
(Option : Enable, Disable)
Port disconnect
notification
Disable
If Enable is selected, inform the “Serial Port Closed info.”
(Option : Enable, Disable)