Solvline Eddy Serial v2.5.1.1 - Manual (Page 56)

Eddy User's Guide
56
def view lan Show LAN network settings.
def view wifi Show WiFi network settings.
def view management Show managing items settings.
def view port Show serial port settings.
def view gpio Show GPIO pin settings.
def view dio Show DIO pin settings.
def help Show command list and help.
6.3 Network commands
Configure general network environment and network management.
Commands Default Descriptions
def mac
<Mac Address>
00:05:f4:00:20:57 Register Eddy’s MAC address.
def line
[ip/dhcp]
Static IP IP obtaining method for Eddy’s network connection.
def ip
<IP Address>
192.168.0.223
Set the current IP address Eddy is assigned to.
When line type is Static IP, manually enter an appropriate
IP address.
When line type is DHCP, it is not editable. Instead, current
IP address is shown.
def mask
<Subnet mask>
255.255.255.0
Set the subnet mask Eddy is assigned to.
When line type is Static IP, manually enter an appropriate
subnet mask.
When line type is DHCP, it is not editable. Instead, current
subnet mask is shown.
def gateway
<Gateway address>
192.168.0.1
Set the default gateway Eddy is assigned to.
When line type is DHCP, it is not editable. Instead, current
gateway address is shown.
def dns
<IP address>
168.126.63.1 Set the Domain Name Service IP address.
def portviewip
<IP address>
0.0.0.0
Configures IP of PC which Portview is installed
If IP is set to 0.0.0.0, NMS feature is disabled.
(Please refer to Portview User’s Manual for detailed
information.)