TechniSat DiGYBOXX HD CX - Manual (Page 63)

63
PL
EN
ES
SL
SR
HU
PL
EN
HU
ES
SL
SR
6.5.2.1 Automatic programme tabs
This function allows the user to add tags during USB recording (DVR recording), in case of programme
change at the recording. The tags get the name of the programme title, which facilitates the search
for the beginning of the programme during playback or processing of the DVR recording. Necessary
data (programme change and title) are gathered from the data stream. Inappropriate name or place-
ment of the tag can result from incorrect name of the programme in the data stream or from too ear-
ly/late signalling of the programme change.
6.5.3 Media Player
The submenu allows the user to choose the startup folder for playback of music, images or fi lms. The
playback of the given media begins in a selected folder upon calling up the command: Media Play Mu-
sic, Media Play Images or Media Play Films.
6.5.3.1 Character encoding
In order to play media (music/images) within the existing network it may be necessary to adjust the
character encoding to the network. That should be done in this line.
6.5.3.2 Startup folder Music/Images/Films
Device View. In this setting, the music navigator starts with choosing the drive when external devi-
ces are connected.
Last Played. In this setting, the music navigator starts with choosing the folder with the last played
MP3 fi le.
6.5.4 HDMI TechniLink
The HDMI-TechniLink function is based on the HDMI-CEC standard. The HDMI-TechniLink ensures
data exchange between devices that are compatible with the HDMI-CEC, which enables automatic
activation or deactivation, or control of volume in the devices connected via HDMI.
7. Operation
7.1 Turning the device on
> Turn the digital receiver on by pressing the ON/Standby button on the device or on the remote control.
7.2 User selection
In case the user-dependent Child Lock function is active (temporary account for children), the choice
of user profi le is displayed upon startup of the device.
> Select user profi le using the up/down arrows.
On the right side, next to the user profi le selection, current status (e.g. time remaining in a given day)
is displayed.
> Confi rm by pressing OK. If PIN demand is not active for that profi le, TV image will be displayed. If it is
active, the PIN demand will be displayed.
> Enter the user PIN number using the numeric keypad. When the number is correct, the TV image will
be displayed.
> If the user profi le is to be changed during use, turn off the device by pressing the On/Standby button
and turn it on by pressing that button again to call up the user profi le selection.