Toa VX-3000DS CE-GB - Manual (Page 15)

15
5.2.2. when not using a redundant power system
Required power is supplied to the system from a single power supply unit. Connect the [+] terminal of Input A to
the [+] terminal of Input B, and the [–] terminal of Input A to the [–] terminal of Input B.
28 V 4.8 A DC POWER IN CH3 CH1
CH4 CH2
PA OUT (SP LINE)
C H CH1 C H CH2 C H CH3 C H CH4
28 V 4.8 A
DC POWER IN
FUSE 35A (POWER OUT)
BATTERY POWER IN
24V MAX 150A
POWER OUT(-)
1 2 3 4 5 6 7
POWER OUT(+) 19-33V MAX 25A
WARNING
Take special care to prevent the battery
from being shorted by misconnection
of the battery cable.
If the shore occurs, the unit may fail.
OUT
DS LINK
16-24V
MAX 0.3A
POWER OUT
TEMPER
ATURE
SENSOR
8
IN
POWER OUT(-)
POWER OUT(+) 20
CH4 CH3 CH2 CH1 CH4 CH3 CH2 CH1
h g e f d c a b
FUSE
250V
2 1
T6.3A L
d c a b
h g e f
VX-3000DS
4P removable terminal plug
(supplied with the SX-2000SM, SX-2100AI,SX-2000AO,
SX-2100AO, SX-2000CI, and SX-2000CO)
(DC power input terminal) (DC power input terminal)
SX-2100AI
SX-2100AO or SX-2000AO
(The figure below shows the SX-2100AO.)
SX-2000SM
SX-2000CI
SX-2000CO
+
+
+
-
-
-
VP-2064, VP-2122, VP-2241, or VP-2421
VP-3154, VP-3304, or VP-3504
230 V AC
220 V AC
50/60 Hz
Cable: AWG 18 – AWG 14
Note
To supply DC power to each component such as SX-2100AO and SX-2000SM except power amplifiers, the
VX-3000DS’ “POWER OUT 19 – 33 V MAX 25 A” terminal can also be used.