Toa VX-3000DS CE-GB - Manual (Page 29)

29
Power Source 220 – 230 V AC, 50/60 Hz
Power Consumption 2800 W max. in total (at rated output with charging)
650 W max. in total, 350 W max. each (EN60065)
DC Power Output (AC
mode)
Rated output: 2300 W (total DC power output)
Peak output: 2780 W (total DC power output)
Current Specification Maximum output current from the battery : 50 A
Rated maximum continuous output current, I max. a : 50 A
Rated maximum short duration output current, I max. b : 50 A
Rated minimum output current, I min.: 0 A
Ripple Voltage at I max. b: 4 V max.
DC Power Output 8 x 31 V (19 – 33 V) 25 A max. each, M4 screw terminal,
distance between barriers: 11 mm
3 x 31 V (19 – 33 V) 5 A max. each, removable terminal block (3 x 2 pins)
1 x 24 V (16 – 25 V) 0.3 A max., removable terminal block (1 x 2 pins)
Charging Method Temperature compensated trickle charging
Charging Output
Voltage
27.3 V ± 0.3 V (at 25°C)
Temperature correction coefficient: –40 mV/°C
Battery Connection 1 pair of positive and negative terminals
Applicable cable diameter: AWG 6 − AWG 0 (AWG 1/0) (16 – 50 mm 2 )
Line resistance within: 4 mΩ/total
Applicable Battery Panasonic: LC-X1265PG/APG (65 Ah), LC-XA12100P (100 Ah),
LC-XB12100P* (100 Ah)
Yuasa: NP65-12 (65 Ah), NPL100-12 (100 Ah)
* Compliant with EN 54-4
Control Connector
(DS LINK IN/OUT)
RJ45 female connector for connecting the system and cascade connection
Shielded twisted-pair straight cable (TIA/EIA-568A standard)
Type of control signal: Battery check, AC power status, DC Power status,
charging circuit failure, battery failure, and communication
Panel Indicator AC power IN1, IN2: Green LED
Charging: Green LED
Battery power: Green LED
Battery connect: Green LED
Battery condition: Green LED
Operating Temperature –5 to +45°C
Operating Humidity 90% RH or less (no condensation)
Finish Panel: Surface-treated steel plate, black (30% gloss), paint
Dimensions 482 (w) x 132.6 (h) x 400.5 (d) mm
Weight 11.8 kg
Fuse Rating Blade fuse (35 A), Fuse (T8A H), Fuse (T6.3A L)
Fuse T8A H .......................................................... 2
Fuse T6.3A L ........................................................ 2
Blade fuse (35 A) ................................................... 2
Rack mounting screw
(with plain washer) 5 x 12 ...................................... 4
Power cord (2 m) .................................................. 2
Fastener hook ...................................................... 4
Fastener loop ....................................................... 4
Sticker (Declaration of compliance) ...................... 1
CAT5 STP cable (3 m) .......................................... 1
Thermal insulating sheet ...................................... 1
Ferrite cable clamp ............................................... 1
Note: The design and specifications are subject to change without notice for improvement.
10. SPECIFICATIONS
• Accessories
Traceability Information for Europe
Manufacturer:
TOA Corporation
7-2-1, Minatojima-Nakamachi, Chuo-ku, Kobe, Hyogo, Japan
Authorized representative:
TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg, Germany