Nomenclature and functions, Front – Toa VX-3000DS CE-GB User Manual

Page 5

Advertising
background image

5

3. NOmENClATURE AND FUNCTIONS

[Front]

1

2 3

4

5 6

AC POWER

BATTERY

IN1
IN2

POWER
CONNECT
CONDITION

POWER SUPPLY MANAGER VX-3000DS

CHECK

CHARGING

1. Power indicators [AC POwER IN1, IN2]

Light green when AC power is supplied through the

AC inlets (18).

2. Battery connection indicator

[BATTERy CONNECT]

Lights green when the battery is connected.

3. Battery indicator [BATTERy POwER]

Indicates the state of battery usage. Lights green

when the AC power supply is interrupted and

switched over to the backup batteries.

4. Charging indicator [CHARGING]

Indicates battery charging status. Flashes green

while charging, and continuously lights green after

charging completion.

5. Battery check button [BATTERy CHECk]

Pressing this button permits the internal resistance

measurement of the backup batteries and also the

operation check of the built-in 2 fans.

The Battery check indicator goes off if the measured

resistance exceeds the specified value.

In automatic mode, the unit performs battery check

every 3 and a half hours.

When the DS LINK is connected to the VX-2000

system, SX-2000 system, or VM-3000 system,

the resistance measurement is activated by the

equipment, not by the unit itself.

Note

Battery check cannot function for 1 minute during

of which Battery indicator (3) flashes twice, pause,

and then repeats after it has been activated once.

In this case, wait a few minutes, then reactivate it.

6. Battery check indicator [BATTERy CONDITION]

In the AC operated system, the internal resistance

value of the battery is measured automatically or

manually to check whether the battery is faulty.

The Battery check indicator indicates the result.

• Before measurement:

Flashes green at 2-second intervals.

• During measurement:

Flashes green at 1-second intervals.

• Normal:

Lights green.

• Abnormal: Remains unlit.

In the battery-operated system, the battery voltage

is constantly monitored and its level is indicated by

the indicator as shown below without pressing the

Battery check button.

• Lights green: 25 V or more

• Flashes green: 20 – 25 V

• OFF:

20 V or less

Advertising
This manual is related to the following products: