USL JSD-60 Manual - Manual (Page 14)

Page 14

Hearing Impaired and Visually Impaired - Narrative – pluggable Phoenix connector.

COAX – RCA jack with transformer input

TOSLINK – Optical.

8 Channel Digital AES/EBU – DB25F and RJ45.

Removable Memory Card – SD compatible.

Serial Control – RS-232 on DB9F.
 Pulse Automation – DB25F.

10/100M Ethernet – RJ45.

DC 12V Power Connector – 5mm with 2.5mm pin.

AC Power – IEC socket. 100-240VAC, 50/60Hz, 18W typical.

Eight Channel Audio Output - DB25M. Eight balanced outputs for full range or low band (if crossover option
installed).

Crossover Audio Output - DB25M (crossover option only). Balanced outputs for left, center, and right high
band plus LFE2.
Processing

96 kHz processing.

One-third octave equalization on all channels except LFE, HI, and VI-N.
 Parametric equalizers on LFE.

Synchronization delays for all inputs.

Surround delays for all surround channels.

Optional Internal crossovers. Crossovers support biamp with 3 screen channels plus individual parametric
equalization and two LFE outputs. Crossover includes a speaker library and allows for user defined speaker
systems.
Bypass Mode
In an emergency situation, the JSD-60 can be switched off, automatically enabling the bypass circuitry. Front panel
buttons, LEDs, display, and fader will still function, allowing the operation of the unit in various analog and digital
formats. Final output is a monophonic signal fed to the left and right channels. Note: The 12 VDC bypass power
supply must be connected for this functionality.
Graphical User Interface
The JSD-60 Graphical User Interface (GUI) operates under Windows XP, Windows 7, and Windows 8. It
communicates with one or more JSD-60 systems simultaneously over USB, Ethernet, or RS232. The GUI is used for
system configuration including auditorium equalization (both manual and automatic equalization).
Dynamic Range: Typically 105dB.
Power Requirements: 100-240VAC, 50/60Hz, 30 watts maximum (18 watts typical).
Dimensions: Standard 1U rack-mount chassis.
Agency Approvals: UL, cUL, CE and FCC.
7. Installation
7.1 Initial Power Up
A quick power-up test of the JSD-60 is suggested before mounting it in the equipment rack and wiring it up. This
test can quickly detect shipping or other damage.

Turn the AC power switch to the off position.

Using the supplied AC line cord or one appropriate for the installation location (the power supply is a universal
input supply 100-240 VAC, 50/60 Hz), connect the JSD-60 to the AC line.