Audio input connections, Analog audio output connections – USL JSD-60 Manual User Manual
Page 16
Page 16
15. Public Address and Real Time Analyzer microphone phantom power supply selector, 12V balanced, 9V
unbalanced, and off.
16. Public Address and Real Time Analyzer microphone – XLR and ¼” stereo jack with configurable phantom
power.
7.4
Eight Channel Analog with Crossover Output Rear Panel Connections (JSD-60LX or JSD-60DX)
1
2
3
4
6
5
7
8
10
12
14
15
16
17
18
19
9
11
13
1. Power entry Module – Accepts IEC-type line cord from 100-240VAC power source. Also contains a 500mA Slo-
Blow 5x20mm fuse.
2. Bypass Power Supply – 12VDC at 1.25A.
3. RS-232 on a DE9F connector for communications with GUI or automation.
4. SD Card – Stores a backup copy of unit configuration. Can also be used to transfer settings to another unit or
read by the GUI to download to a connected unit.
5. AES/EBU connector (RJ45) – parallel connections to the DB25F to the right.
6. Ethernet connector (RJ45) – Network communications with GUI, web browsers, automation, etc.
7. AES/EBU Ethernet connector (DB25F) – Eight channels, DMA8 pin out.
8. Automation DB25F Connector – Receives automation pulses from other system components. Ten Control
input lines with ground and 5V power provided to support a standard pulse to to ground system. The 5V
output can power a JSDV-80 remote volume control that pulses control lines 9 and 10.
9. Crossover bypass output levels for high and low bands.
10. COAX - RCA type connector (PCM) with optional DTS® and Dolby Digital®
decoding.
11. Crossover balanced stage high band (L, C, R) and LFE 2 outputs.
12. TOSLINK Port – Optical Fiber input (PCM) with optional DTS® and Dolby Digital®
[1]
decoding.
13. Crossover bypass frequency and mode selection switches.
14. Hearing Impaired/Visually Impaired-Narrative outputs.
15. Eight channel analog outputs. Low band on screen channels, full range on surround channels.
16. Six channel analog input on DB25F – Balanced line inputs.
17. Non Sync (N/S) connectors – L and R analog inputs, RCA type connectors.
18. Public Address and Real Time Analyzer microphone – XLR and ¼” stereo jack with configurable phantom
power.
7.5
Audio Input Connections
Eight Channel AES/EBU Input
The JSD-60 accepts 8 channel AES/EBU audio. This input is typically driven by the digital cinema server (DCS). The
JSD-60 includes a DB25F connector using the Dolby® DMA8 pin out and an RJ-45 connectors using the StudioHub
[2]
pin out. The first six channels are assigned speakers by industry convention. The remaining channels can be
configured by the user (i.e., sources for HI/VI-N, Lrs, Rrs, etc.). For convenience, all connector pin outs are listed in
Appendix A.
Six Channel Analog Input
The JSD-60 six channel analog input is on a DB25F connector. The analog inputs are active balanced (differential)
inputs. They may be driven by balanced or unbalanced sources. When driven by an unbalanced source, the
negative input should be connected to the low side of the source at the source equipment to minimize ground
[2]
Please see the Studio Hub website: