USL JSD-60 Manual User Manual
Page 50
Page 50
When the channel configuration is “Drive In,” the outputs and their use are listed in the following table.
Audio Channels Drive In
Audio Channel DB25M Main Output Pins (+, -, shield)
Left Transmit
2, 14, 1
Right Transmit
8, 20, 7
Field
23, 10, 22
Snack Bar
24, 11, 9
Monitor
16, 3, 15
Signals Listed By Connector Pins
DB25M Pin
Signal Name
Channel Name
1
GND
2
L+
Left+
3
Lrs-
Left Rear Surround-
4
GND
5
C+
Center+
6
Rrs-
Right Rear Surround-
7
GND
8
R+
Right+
9
GND
10
Ls-
Left Surround-
11
Rs-
Right Surround-
12
LFE-
Low Frequency Effects-
13
GND
14
L-
Left-
15
GND
16
Lrs+
Left Rear Surround+
17
C-
Center-
18
GND
19
Rrs+
Right Rear Surround+
20
R-
Right-
21
22
GND
23
Ls+
Left Surround+
24
Rs+
Right Surround+
25
LFE+
Low Frequency Effects+
Crossover Analog Audio Outputs
With the Crossover option board installed, additional outputs are available on an addtional DB25M connector. This
connector has the high band and a LFE2 outputs. The low bands and surround channels are on the main audio
output connector.