USL JSD-60 Manual - Manual (Page 27)

Page 27
8.10.1 Summary Tab
The “Summary” tab (shown above) gives an overview of the JSD-60. The Theater Information fields may be
changed as needed for the unit’s installation details. The other sections of this screen cannot be changed. These
are unit settings and inform the user about the hardware configurations, firmware, and network connection
information.
Theater Information
The data in the theater information fields is not used by the JSD-60, but is stored in the JSD-60 for the convenience
of the user. Fill in the desired information. This data will be saved with other configuration information in the JSD-
60 and displayed the next time the unit is connected to. When viewing the Overview, the Theater Name will
appear in the title for each screen.
Component Information
Various pieces of information about the JSD-60 are shown here. The Output Type identifies an output option card
installed. By default, the output option will indicate “Analog 8.” Included in this group are the board and firmware
versions. The version of the Windows application is shown in the GUI Version field.
Network Information
This is the network information that was set with the JSD-60 Set IP Utility, discussed Section 8.3.